Shelly Pro RGBWW PM | Wi-Fi & LAN Smart Remote Control for RGBW Led Strips with Power Metering | Home Automation | No Hub | Compatible with Alexa & Google Home | iOS Android App | Dimming Control
$63.99
Additional Information
| Best Sellers Rank |
|
|---|
,
8 reviews for Shelly Pro RGBWW PM | Wi-Fi & LAN Smart Remote Control for RGBW Led Strips with Power Metering | Home Automation | No Hub | Compatible with Alexa & Google Home | iOS Android App | Dimming Control
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Shelly Pro RGBWW PM | Wi-Fi & LAN Smart Remote Control for RGBW Led Strips with Power Metering | Home Automation | No Hub | Compatible with Alexa & Google Home | iOS Android App | Dimming Control
$63.99


Gregory Weston –
Wow
Stumbled on this by accident. Great 12v relay and app.
Nonehere –
No coil whine with Mean Well
Was hesitant to buy due to the reports of a whine occuring based on brightness level or color temp, etc… Have 5 of these, powered by both Mean Well NDR-480-24 and NDR-240-24 and have had no issues. I do have wifi and bluetooth disabled and have them hardwired. They are used to control rgbcct strips.
David –
So far I cannot setup the device
So far I cannot setup the device. Not from lack of trying!I have reset it multiple times and tried both via the app and via the AP mode. Nothing worksI have an email into customer support
J s –
Good but makes noise
Works well with Home Assistant. This is the only Shelly LED controller that can do two channel CCT strips and 5 channel RGBWW strips. It has adjustable CCT values so that Home Assistant produces the correct color temperatures.The main problem is that it emits a high frequency noise.
Jānis –
👍
Dhell –
Parfait, idéal pour gérer deux bandes LED CCTBlanc chaud, blanc froid.
Shiwa –
Ich habe mich für diesen Typ entschieden, da es derzeit der einzige Shelly ist, der zwei CCT-LED-Stripes unabhängig ansteuern kann. Grundsätzlich funktioniert das auch wie erwartet.Allerdings war ich negativ überrascht, dass bei mittlerer Farbtemperatur beide Farbkanäle mit 100 % Helligkeit angesteuert werden, statt bei mit jeweils 50%. Das führt dazu, dass sich beim Verändern der Farbtemperatur automatisch auch die Gesamt-Helligkeit verändert – was nicht ideal ist.Das No-Go für mich ist aber, das unüberhörbare Fiepen, sobald die Helligkeit unter 100 % liegt. Anbei ein Screenshot des Frequenzspektrum mit dem Grundton bei ~2,5kHz und seinen Obertönen.Leider scheint das kein Einzelfall zu sein wenn man in die Foren schaut. Im Gegensatz zum Shelly RGBW PM verfügt dieses Modell nicht über ein “hochfrequenz Modus”. Ich habe es daher leider zurückschicken müssen.
Thomas Steger –
Was hat shelly da jetzt verpfuscht?das Gerät surrt so laut dass man davon Gänsehaut bekommt. Ich konnte es nicht glauben dass sie so was verkaufen also habe ich noch einen bestellt. Gleiches Resultat gehen beide zurück. So sind sie unbrauchbar.