MaxxHaul 80439 Aluminum Ramp Top Kit
$21.99
Additional Information
| ASIN | B01MQVYNTS |
|---|---|
| Customer Reviews |
4.7 out of 5 stars |
| Best Sellers Rank |
|
| Date First Available | December 14, 2016 |
Warranty & Support
Manufacturer’s warranty can be requested from customer service. Click here to make a request to customer service.
,
Customers say
Customers find the aluminum ramp top kit works well as a Conex ramp and appreciate its quality and ease of assembly, particularly noting how easily it attaches to 2×8 planks. The product is strong, handling weight well, and customers consider it good value for money, with one noting it’s a bargain compared to metal alternatives. While some customers report the kit comes complete with bolts, others mention missing hardware, and opinions on size are mixed, with some finding it perfect for 2×10 ramps while others say it’s not 8″ wide.
13 reviews for MaxxHaul 80439 Aluminum Ramp Top Kit
Show all
Most Helpful
Highest Rating
Lowest Rating
Book guy –
Ramp brackets
Worked like a charm. Easy to install. They seem to be of good quality. I use them as shed ramps for a golf cart. Very pleased with the purchase.
Amazon Customer –
Easy to Install – easy to use
I bought the ramp kit to make it easier to load my lawn mower, and probably my snowblower into my truck bed. The were easy to install on the recommended 2′ x 8′ boards. (I made 2, 4′ ramps). Depending on the height of your tailgate you may want to increase the length of the boards that you use so that the angle is not steep. Hardware was included, along with 4 cotter pins, that are for ???? Also included were two self-sticking foam pads that go on the underside of the ramp where it sits on the edge of the tail gate to prevent scatching. They work ok. I put an old folded towel on the lip of the tailgate then set the ramps in place. This prevents scratching from the metal ramp.
Irving R Levine –
Good quality
Worked well for me. If you want to build a couple ramps these will do the job!
Derek G. –
Reasonably satisfied considering the price paid
True to expectations, takes a 7.25 x 1.5 (2×8) plank. Holes are 5″ center to center.Cosmetically, it looks nice and feels both solid and reasonably well made.A little disappointed they left some aluminum burrs / chips from when they counter sunk the holes and all other edges were left sharp.One of the edges on each ramp was dinged but for the price paid, I don’t have a problem with it.
Robert –
Great product
Exactly what I needed. Easy to install. And don’t slip
letty g. –
Durable
Very durable just a little DIY
Have Blue –
Great cost-saver as long as you don’t mind lugging 2×8’s around!
I’m surprised and happy that these exist. I headed down to the lumber yard to get 2″ x 8″ in 10-foot lengths, and I’m glad that I did. The 10-feet lengths are, admittedly, a chore to store and to strap down hanging out of the pickup bed, but the lower angle they put the ramp at is so worth it for a nice easy clutch-modulation to get the bike up the ramp. In fact, I don’t think that I used the throttle at all, just slipped the clutch from idle to get the 360-pound motorcycle up the ramp.Pictured are the ramp-ends on a pickup-bed tailgate that is about 32 inches high. Also pictured are the two eye-bolts I bought from the big orange box store. I drilled smaller pilot holes for those. Also pictured is the ratchet-strap to the rear bumper from the eye-bolts for securing it (too many videos of people having their ramps jut out from beneath the bikes – don’t be that person, lol). Lastly, since I used the two 2×8’s next to each other (with an object to the left of them to use as a step-up into the bed), I used an additional ratchet-strap near the base to hold the two ground-ends together.
Joyce Karagiannis –
It worked well for me on about 200 lbs weight on each
This product is great. No problems whatsoever as it held perfectly on multiple loads/unloads so far. I trust it 100% although I can not say the same for the boards attached to them. If I were to do it again, I would use thicker and better quality boards to attach.
MARQUESE –
Good design made from high strength material.
Bernd –
Habe diese an bestehende Rampen angebaut. Mit nun großen Auflage habe ich auch kein unsicheres Gefühl.Zumal es 250kg Motorrad sind.
Salvador Hernandez Vazquez –
Funciona correctamente y fácil de instalar.
BAUBRY Didier –
Bon produit
Rachelle S –
Work very well, easy to setup. Description says it’s for a 2×8 but I used a 2×10 and have maybe half an inch overhang on each side.Honestly works better with a 2×10